YK-200 Overlay Connection

YK-200 Overlay Connection

YK-200 overlay connector requires a 180 degree twist in the cable to properly connect to the control board.  If you examine the cable you can see that contacts are only on one side of the cable, and you can compare that to the connector on the board to see which way the cable must be connected.

    • Related Articles

    • YK-200 | Manuals & Spec Sheets

      Model Production Years - 12/2007 to 1/2016 Discontinued Model Owner's Manuals Yield King Diagnostics YK-200 Owner’s Manual and Wiring Diagram Discontinued Model Spec Sheets YK-200 Specification Sheet Authorizations ETL Authorization to Mark SC DH & ...

    • YK-100A | Manuals & Spec Sheets

      Model Production Years - 9/2005 to 3/2008 Discontinued Model Owner's Manuals Yield King Diagnostics YK-100A 208v/240v Owner's Manual and Wiring Diagram YK-100A 220v/230v Owner's Manual and Wiring Diagram

    • YK-200 Input Err 4

      Input error 4 code is related to the steam pan thermocouple. Could be a faulty thermocouple, bad connection, or faulty controller. Replacement thermocouple is part# 466004

    • DH-65 | Manuals & Spec Sheets

      Model Production Years - 10/1999 to 5/2019 DH-65 Owner’s Manual and Wiring Diagram (2009 and newer) DH-65 Owner’s Manual and Wiring Diagram prior to 2009 DH-65 208v-240v Specification Sheet DH-65 230v Specification Sheet ETL Authorization to Mark SC ...

    • SC-200 | Manuals & Spec Sheets

      Model Production Years - 5/1991 to 5/2019 Discontinued Model Owner's Manuals SC-100 & SC-200 Owner’s Manual and Wiring Diagram (prior to 2007) SC-200 208v-240v Owner's Manual and Wiring Diagram SC-200 230v Owner's Manual and Wiring Diagram SC-200 ...