Can you convert a mechanical thermostat controller to a digital controller on above the door mounted units?
Above the door mounted thermostat controls can no longer be converted to digital controls.
After multiple attempts to do this it is always found that the moisture escaping the top of the doors kills the digital controllers in less than a year in most cases.
Because of this converting above the door mounted controls to digital controls is no longer supported.
Diagnose No Power To CV Thermostat
**NOTICE** All repairs should be performed by a certified technician. Southern Pride of Texas® is not liable for any damges, or injury if you choose to attempt repairs on your own. When dealing with high voltage, and moving drive systems there is a ...
Digital Cook & Hold Digital Thermostat Programming Instructions
CONTROL OPERATING INSTRUCTIONS 1. The product loading doors must be closed. 2. The control should be in the “IDLE” mode. (The burner, convection fan, and the rotisserie will be off). If the control is “OFF” a press of any button will bring the ...
No Power To CV Thermostat
Check for 120v across from L1 and L2 on CV thermostat. If you have 120v then thermostat is faulty. If no 120v then check for 120v from terminal 3 of main power switch to case ground. If no 120v then check for 120v from terminal 4 of main power switch ...
BBR-700 Cook & Hold Thermostat Controller Programming Instructions
BBR-79-1 Door Closures
The BBR-79-1 had anything other than 771001 door closure. Earlier models were designed with a seperate cover to protect users from catching their finger in the spring. If you had this version the current door closure 771001 will not line up ...